Devices /Flood Detector

The Flood Detector consists of a transceiver, flood sensor and 3-meter flood sensor cable.
Protect your property from water damage! The Flood Detector is designed to sense the presence of water in basements, yachts and many other residential and commercial areas, providing early warning of developing floods.
The Flood Detector is designed so that the transceiver is mounted on the wall and the flood sensor is placed in a location where water presence, such as a result of leakage or flooding, is probable.
Upon flood detection, the Detector will beep and flash and report its status to the Gateway. Once water is released, it will report to the Gateway as well.
The Flood Detector is powered by 3 x AA 1.5V alkaline battery. When battery level drops below unacceptable level, the Detector flashes red LED once every 30 seconds and reports low battery status to the node ID. When this occurs, the batteries should be replaced as soon as possible.

  • Adopt U-net protocol to secure the success of wireless two way communication
  • Easy install
  • Low battery indication
  • IP44 water proof
  • Special water sensor probe design to prevent false trig
  • U-net 3.0
  • Beep sound and LED indication
Power Operating Voltage 1.5V AA size x 3
Standby current 19 uA
Operating current 35mA
Low battery voltage 3.4V
Low battery voltage 3.0V
RF Frequency 868MHz (EU)/ 923MHz (USA. Taiwan)
Regulation FCC part15.249 / EN300 220-1/
Distance 30M indoor 70M outdoor
Mechanical weight 169 g (without battery)
Dimension (W*H*D) 85x85x39 mm
Battery Battery life 2400mAh
1 year
Environment Operation Temperature -10 ~ 50° C
Humidity 85%RH max

unit: mm

This item is available in the following packages: Combined